including BUILD_surface_on_nurbs PCL 1.5.1

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

including BUILD_surface_on_nurbs PCL 1.5.1

amutka
Dear PCL users,

i have errors in compiling the PCL project after enabling the BUILD_surface_on_nurbs in CMAKE configuration.
I have been working by the instruction for compiling the PCL in windows,

http://pointclouds.org/documentation/tutorials/compiling_pcl_windows.php#compiling-pcl-windows

and if I disable the problematic NURBS complete source and tests can be compiled(pcl_surface project can be build successfully),

Enabling the BUILD_surface_on_nurbs, the following errors occurs while building the pcl_surface.

1.
double N[m_nurbs.m_order * m_nurbs.m_order];
:cannot allocate an array of constant size 0,
2.
then the isnan fuction I cannot find...

3.
Then: cannon convert parameter 1 rom CHAR[32] to const wchar_t...
....total over 100 same errors.


Please suggest me what to do, what i'm doing wrong?  I have installed all requirements and also Gtest for examples and as I said before everything works fine without nurbs.  But I would like also to compile nurbs :)
Thank you!

Best regards,
Alan
--
Alan Mutka Research and teaching assistant Laboratory for Robotics and Intelligent Control Systems Faculty of Electrical Engineering and Computing University of ZAGREB

_______________________________________________
[hidden email] / http://pointclouds.org
http://pointclouds.org/mailman/listinfo/pcl-users
Reply | Threaded
Open this post in threaded view
|

Re: including BUILD_surface_on_nurbs PCL 1.5.1

Radu B Rusu
Administrator
Alan,

 From what I know the NURBS code is still in flux in trunk, which means it hasn't been tested on all platforms yet. If
you're willing to try it on your Windows machine, you could perhaps help us isolate some of the remaining bugs and thus
speed up the platform qualification process for all the NURBS code.

If you're interested, let's follow up on this on pcl-developers@. Thanks in advance!

Cheers,
Radu.

On 06/21/2012 08:23 PM, Alan Mutka wrote:

> Dear PCL users,
>
> i have errors in compiling the PCL project after enabling the BUILD_surface_on_nurbs in CMAKE configuration.
> I have been working by the instruction for compiling the PCL in windows,
>
> http://pointclouds.org/documentation/tutorials/compiling_pcl_windows.php#compiling-pcl-windows
>
> and if I disable the problematic NURBS complete source and tests can be compiled(pcl_surface project can be build
> successfully),
>
> Enabling the BUILD_surface_on_nurbs, the following errors occurs while building the pcl_surface.
>
> 1.
> *double N[m_nurbs.m_order * m_nurbs.m_order]; *
> :cannot allocate an array of constant size 0,
> 2.
> then the *isnan *fuction I cannot find...
>
> 3.
> Then: cannon convert parameter 1 rom CHAR[32] to const wchar_t...
> ....total over 100 same errors.
>
>
> Please suggest me what to do, what i'm doing wrong? I have installed all requirements and also Gtest for examples and as
> I said before everything works fine without nurbs. But I would like also to compile nurbs :)
> Thank you!
>
> Best regards,
> Alan
> --
> Alan Mutka Research and teaching assistant Laboratory for Robotics and Intelligent Control Systems Faculty of Electrical
> Engineering and Computing University of ZAGREB
>
>
> _______________________________________________
> [hidden email] / http://pointclouds.org
> http://pointclouds.org/mailman/listinfo/pcl-users
_______________________________________________
[hidden email] / http://pointclouds.org
http://pointclouds.org/mailman/listinfo/pcl-users
Reply | Threaded
Open this post in threaded view
|

Re: including BUILD_surface_on_nurbs PCL 1.5.1

eyebies
In reply to this post by amutka
Alan-
Were u able to resolve the linker errors. Pls do let me know
thanks!
~p